belajar dan berbagi

Cara Setting Modem Speedy Lengkap

 Cara Setting Modem Speedy Lengkap
Berikut ini cara setting modem yang digunakan untuk layanan Telkom Speedy


Adsl Modem SMC

Default IP: 192.168.2.1
Default password: smcadmin

Setting Bridge:

Klik WAN
Clik ATM PVC
Klik VCI
Protocol: 1483 Bridging, VLAN: Default, VPI/VCI: 8/81, Encapsulation: LLC, Qos Class: UBR, PCR/SCR/MBS: 4000/4000/10
Klik Save Settings


SMC

Setting PPPoE:

Klik WAN
Klik ATM PVC
Klik VCI
Protocol: PPPoE, VPI/VCI: 8/81, Encapsulation: LLC, QoS Class: UBR, PCR/SCR/MBS: 4000/4000/10, IP assigned by ISP: Yes, IP Address: 0.0.0.0, Subnet Mask: 0.0.0.0, Connect Type: Always Connected, Idle Time (Minute): 5, Username: nmrspeedy@telkom.net, Password: (password dari telkom), Confirm Password: , MTU: 1492
Save Settings


Adsl Modem ZyXeL

P-660R

Default IP: 192.168.1.1
Default username: admin
Default password: 1234

Setting Bridge

Pilih Network
Pilih WAN
Mode: Bridge, Encapsulation: RFC 1483, Multiplexing: LLC, VPI: 8, VCI: 81, Apply
Pilih Maintenance
Pilih Tools
Restart

Setting PPPoE

Pilih Network
Pilih WAN
Mode: Routing, Encapsulation: PPPoE, Username: ( nmrspeedy@telkom.net), Password: (password speedy), Service Name: Speedy, Multiplexing: LLC, VPI: 8, VCI: 81, IP Address: Obtain an IP Address Automatically, Connection: Nailed-Up Connnection, Apply
Klik Maintenance
Klik Tools
Restart


Adsl Modem Shiro

Default IP: 192.168.1.1
Default username: admin
Default password: admin

Setting Bridge:

Klik Advanced
Klik WAN
Klik New Connection
Connection Name: Speedy, Type: Bridge, VPI: 8, VCI: 81, and Submit
Save Settings
Restart Router

shiro

Setting PPPoE:

Pilih Advanced
Pilih WAN
Klik New Connection
Connection Name: Speedy, Type: PPPoE, Sharing: Enable, Encapsulation: LLC, Username: nmrspeedy@telkom.net, Password: (password dari telkom), VPI: 8, VCI: 81, and Submit
Save Settings
Restart Router

shiro pppoe


Adsl Modem Aztech

Default IP: 192.168.1.1
Default username: admin
Default password: admin

Setting Bridge:

Klik Advanced
Klik WAN
Klik New Connection
Connection Name: Speedy, Type: Bridge, VPI: 8, VCI: 81, and Submit.
Save Settings
Restart Router

Setting PPPoE/Router:

Klik Advanced
Klik WAN
Klik New Connection
Connection Name: Speedy, Type: PPPoE, Sharing: Enable, Encapsulation: LLC, Username: nmrspeedy@telkom.net, Password: (password dari telkom), VPI: 8, VCI: 81, and Submit.
Save Settings
Restart Router


Adsl Modem TECOM

AR1031

Default ip: 192.168.1.1
Default username: admin
Default password: admin

Setting Bridge:

Klik Advanced Setup
Klik WAN
Klik Edit
ATM PVC Configuration, VPI=8; VCI=81, Service Category: UBR Without PCR, Next
Connection Type Bridging, Encapsulation Mode LLC/SNAP-BRIDGING, Next
Cheklist Enable Bridge Service, Service Name: Speedy, Next
WAN Setup - Summary, Save
Save/Reboot




tecom

Setting PPPoE:

Klik Advanced Setup
Klik WAN
Klik Edit
ATM PVC Configuration, VPI=8; VCI=81, Service Category: UBR Without PCR, Next
Connection Type PPP over Ethernet (PPPoE), Encapsulation Mode LLC/SNAP-BRIDGING, Next
Put your PPP Username: nmrspeedy@telkom.net; PPP Password: (password dari telkom); PPPoE Service Name: Speedy, Next
Cheklist Enable WAN Service, Service Name: Speedy, Next
WAN Setup - Summary, Save
Save/Reboot

tecom pppoe


Adsl Modem Billion

Setting:

Login To: http://192.168.1.254
User name = admin; Password = password dari telkom
Klik -> OK
Klik: Quick Start
Edit Connection:
Encapsulation = PPPoE LLC
Bridge = Enabled
Setting VPI = 8 dan VCI = 81 , and Than
Static IP Setting
IP Address = 0.0.0.0
subnet mask = 0.0.0.0
Gateway = 0.0.0.0
Klik: - Submit
- SAVE CONFIG
Klik: Submit
Wait Till process Configuration done !
Configuration Done !


Modem Prolink

Login To -> http:// 10.0.0.2
User Name: admin
Password: password
Klik . . . . OK

Chose Configurasi WAN:
Select Adapter: Pilih Pvc3 (Indonesia)

Edit Field:
Bridge = Enable
Encapsulation = 1483 Bridge IP LLC
ATM VPI = 8
ATM VCI = 81


prolink

Static IP Setting: “ just blank “
IP Address = just empty
Subnet Mask = just empty
Gateway = just empty
User Name = username@telkom.com. . . . . . ( optional ) *
Password = xxxxxxxx . . . . . . . . . . . . . . . . . . .( optional ) *
* If you choose to put username & password there just double clik explorer
* If you not choose to put username & password there you have to create new connection at Network Connection
Create New Connection (Bridge) See here..>>
Than Next:
* Klik Submit
* Klik Save Configuration
Next: Save Reboot ….


Adsl Modem D-Link

DSL-302T

Default IP: 192.168.1.1
Default username: admin
Default password: admin

Setting Bridge:

Klik Setup
Klik Connection
Bridge Connection Setup. Name: Speedy; Type: Bridge; Encapsulation: LLC; VPI=8; VCI=81, Apply
Klik Tools
Klik System Commands, Save All, Restart


d-link

Setting PPPoE/Router:


Klik Setup
Klik Connection
Bridge Connection Setup. Name: Speedy; Type: PPPoE; Username: nmrspeedy@telkom.net; Password: (password dari telkom); VPI=8; VCI=81, Apply
Klik Tools
Klik System Commands. Save All, Restart


d-link2


adsl Modem Repotec

Buka Internet Explorer ketik: http://192.168.1.1
Username: admin & Password: epicrouter
Klik: OK
Klik WAN
Pic Adapter: Pvc0
Klik Submit
Virtual Circuit = Enabled
Bridge & IGMP = Disable
Each region was different from another region and for Bandung vpi:8 , vci: 81
Service Category = UBR without PCR
Protocol/Conection type = PPPoE
Encapsulation = LLC/Snap-Bridging
Put Username & Password from your provider
Klik Submit.
Klik Save Configuration (wait till Saving configuration done.)
put DNS: 202.134.0.155 & 202.134.2.5


Adsl Modem Dareglobal

Default IP: 192.168.1.1
Default username: admin
Default password: admin

Setting Bridge:

Klik Advanced Setup
Klik WAN
Find VPI/VCI: 8/81, Klik Edit
ATM PVC Configuration, VPI=8; VCI=81, Service Category: UBR Without PCR, Next
Connection Type Bridging, Encapsulation Mode LLC/SNAP-BRIDGING, Next
Cheklist Enable Bridge Service, Service Name: Speedy, Next
WAN Setup - Summary, Save
Save/Reboot

Setting PPPoE:

Klik Advanced Setup

Klik WAN
Cari VPI/VCI: 8/81, Klik Edit
ATM PVC Configuration, VPI=8; VCI=81, Service Category: UBR Without PCR, Next
Connection Type PPP over Ethernet (PPPoE), Encapsulation Mode LLC/SNAP-BRIDGING, Next
Put your PPP Username: Nomorspeedy@telkom.net; PPP Password: (password dari telkom); PPPoE Service Name: Speedy, Next
Centang Enable WAN Service, Service Name: Speedy, Next
WAN Setup - Summary, Save
Save/Reboot


Adsl Modem TP-Link

Default IP: 192.168.1.1
Default username: admin
Default password: admin

Setting Bridge:

Klik Advanced Setup

Klik WAN
Find VPI/VCI: 8/81, Klik Edit
ATM PVC Configuration, VPI=8; VCI=81, Service Category: UBR Without PCR, Next
Connection Type Bridging, Encapsulation Mode LLC/SNAP-BRIDGING, Next
Cheklist Enable Bridge Service, Service Name: Speedy, Next
WAN Setup - Summary, Save
Save/Reboot

dareglobal

Setting PPPoE:


Klik Advanced Setup
Klik WAN
Find VPI/VCI: 8/81, Klik Edit
ATM PVC Configuration, VPI=8; VCI=81, Service Category: UBR Without PCR, Next
Connection Type PPP over Ethernet (PPPoE), Encapsulation Mode LLC/SNAP-BRIDGING, Next
Put your PPP Username: nmrspeedy@telkom.net; PPP Password: (password dari telkom); PPPoE Service Name: Speedy, Next
Cheklist Enable WAN Service, Service Name: Speedy, Next
WAN Setup - Summary, Save
Save/Reboot


Setting Modem Articonet ACN-100R dan ACN-110

Cara melakukan setting di komputer untuk akses ke modem Articonet.
Untuk setting di komputer dilakukan sesuai dengan operating system yang dipakai di komputer pelanggan, disini yang dibahas khusus untuk Windows XP.
Lakukan network setting di PC (komputer) sbb:

a. Start – Control Panel – Network Connection
b. arahkan kursor pada Local Area Connection yang aktif, kemudian klik kanan dan pilih properties
c. kemudian pilih menu Internet Protocol (TCP/IP) dan klik 2X, maka akan muncul menu General.
d. Pilih Obtain an IP Address Automatically kemudian pilih Obtain DNS server address automatically, kemudian tekan tombol OK.

Panduan cara setting modem ADSL Speedy koneksi PPPoE.(PPPoE)
Setting modem dilakukan melalui browser dengan mengakses alamat http://192.168.1.1
Masukkan username dan password: admin/admin
Setelah masuk ke menu setting lakukan langkah berikut:
Masuk ke menu "Advanced Setup" kemudian pilih "WAN" dan klik tombol "Edit" disebelah kanan tabel WAN Masukkan nilai PVC Configuration: (masukkan nilainya sesuai wilayah TELKOM masing-masing daerah)
VPI = X
VCI = XX
Service Category = UBR Without PCR, kemudian klik tombol Next
Connection type = PPPoE
Encapsulation = LLC, kemudian klik tombol Next
Masukkan username dan password Speedy, kemudian klik tombol Next
Tandai atau kasih v untuk pilihan "Enable WAN Service", kemudian klik Next dan klik tombol Save
Setting PPPoE untuk koneksi Speedy telah selesai dilakukan
Selanjutnya klik tombol Save/Reboot
(Modem akan reboot -/+1 menit dan tunggu sampai modem normal kembali)

Berikut langkah setting modem ADSL Articonet untuk Dial-Up/Bridge.
Setting modem dilakukan melalui browser dengan mengakses alamat http://192.168.1.1
Masukkan username dan password: admin/admin
Setelah masuk ke menu setting lakukan langkah berikut:
Masuk ke menu "Advanced Setup" kemudian pilih "WAN" dan klik tombol "Edit" Masukkan nilai PVC Configuration: (masukkan nilainya sesuai wilayah TELKOM masing-masing daerah)
VPI = X
VCI = XX
Service Category = UBR Without PCR, kemudian klik tombol Next
Connection type = Bridging
Encapsulation = LLC, kemudian klik tombol Next
Tandai atau kasih v untuk pilihan "Enable Bridge Service", kemudian klik Next dan klik tombol Save
Setting Bridge untuk koneksi Speedy telah selesai dilakukan
Selanjutnya klik tombol Save/Reboot
(Modem akan reboot -/+1 menit dan tunggu sampai modem normal kembali)

Setting modem Articonet untuk koneksi Bridging sudah selesai, langkah berikutnya setting koneksi Dial-Up di PC/komputer.

Panduan instalasi Dial Up koneksi ADSL menggunakan Windows 2000:

Klik Start, klik Setting,klik Control Panel,
Klik Network and Dial Up Connections.
Klik Make New Connection, klik Next,
Klik Dial Up to the Internet
Klik I want to setup my internet manually, klik Next
Klik I connect through a phone line and a modem klik Next
Pilih dan klik modem ADSL yang sesuai
Isi username:15xxxxxxxxxx@telkom.net
Password: xxxxxxxx
Klik OK dan Lanjutkan sesuai perintah yang muncul
Klik Finish

Panduan installasi Dial Up koneksi ADSL menggunakan Windows Xp:

Klik Start, klik Setting, klik Control Panel.
Klik Network Connection
Klik Create a New Connection, klik Next.
Klik Connect to the Internet, klik Next
Klik Setup my connection manually, klik Next
Klik Connect Using Dial Up, klik Next
Klik modem ADSL yang sesuai, klik Next
Isi username: 15xxxxxxxxxx@telkom.net dan Password: *******
Confirm password: xxxxxxxx
kemudian beri tanda v pada pilihan "Add a shortcut to the desktop screen"
Klik Finish



Catatan <data:blog.pageName/> | <data:blog.title/>:
Posting tentang cara setting modem speedy lengkap ini hanyalah sebuah catatan saya, agar jika sewaktu-waktu membutuhkan artikel ini, saya tidak perlu repot-repot lagi untuk browsing kesana dan kemari untuk mencari tentang cara setting modem speedy. Dan posting tentang cara setting modem speedy ini saya ambil langsung dari website speedy. Namun jika ada teman-teman yang membutuhkan tentang cara setting modem speedy ini ya silahkan di baca. semoga saja posting cara setting modem speedy ini bermanfaat.
Labels: Tutorial

Thanks for reading Cara Setting Modem Speedy Lengkap. Please share...!

0 Komentar untuk "Cara Setting Modem Speedy Lengkap"

Yang sudah mampir wajib tinggalkan komentar

Back To Top